湖北11选5

For more product details, please call us:0731-84930888

HomeElectrical MeasurementStandard Meters

TD3110 Single-Phase Reference Multimeter

单相交流标准仪器,功率/电能测量的准确度为 0。01 


电量测量:电压最大 825 V,电流最大 120 A,手动 / 自动量程换挡

波形显示:通道具有示波器功能,可实时显示被测交流电量的波形

谐波分析:测量 2 ~ 64 次谐波

电能计量:标准电能脉冲输入 / 输出功能,可作为单相交流电能计量的标准表


Overview

Model TD3110, a high-precision single-phase reference multimeter, can simultaneously measure multiple electrical parameters in an AC circuit, such as voltage, current, frequency, phase, harmonic, active power/electric energy, reactive power/electric energy, apparent power, power factor, etc.

The optional accuracy class of voltage or current is 0.005, the corresponding optional accuracy class of power and electric energy is 0.01.

Applied to calibrate AC standard source, and can be used as a reference meter for AC electric energy metering.

Applications

1

 Calibrate single-phase AC voltage or AC current standard sources (class 0.02 and below)

● Calibrate single-phase AC active power sources (class 0.02 and below)

● Calibrate single-phase AC electric energy meters (class 0.02 and below)

Functions

● Electrical Parameter Measurement: The AC voltage is from 3 V to 792 V, the AC current is from 1 mA to 120 A, automatic or manual switching on all ranges.

● Waveform Display: Oscilloscope function can display the waveform of the measured electrical parameters in real time.

● Harmonic Analysis: Measure 2nd to 64th harmonic, analyze harmonic content and total harmonic distortion, and draw harmonic histogram.

● Phase Measurement: Measure phase difference between voltage and current, and intuitively display by phasor diagram.

● Energy Metering: Standard energy pulse I/O function can be used as a standard for single-phase AC energy metering.

● Other Function: Stability test, trend curve display, data statistics and analysis, etc.

Features

● A wide range of AC currents can be measured by connecting current input just with a pair of terminals.

● No shifting on the primary side of the transformers, it will not cause damage or change the measurement accuracy no matter which range suddenly enters a large current.

● High reliability, the switch will not damage the instrument in a limit state (e.g. 500 V, 100A), but can also ensure the values accurate.

● Minimize signal conversion, ADC and other circuit drifts by self-calibration function to ensure values accurate for a long-term. The self-calibration function is still effective even with 100 A DC current in the loop.

● Good electrical isolation and protection between AC voltage and AC current measurement loop.

● The temperature coefficient of voltage or current is less than 0.5 ppm/K, the 1 year change rate of major specifications is less than 50 ppm, and the average trouble-free running time of the instrument is more than 10,000 hours.

● Large LCD touch screen, more intuitive of value display and easier operation.

● Easy to build automatic detection system with the built-in RS-232 interface.

Electrical Specifications

AC Voltage

2

Measurement Characteristics

● Range Switching: Automatic or Manual

 Measuring Range: 3 V to 792 V

● Minimum resolution: 10 μV @ 30 V range

● Display: 7 digits

AC Current

3

Measurement Characteristics

● Range Switching: Automatic or Manual

● Measuring Range: 1 mA to 120 A

● Minimum resolution: 1 nA @ 5 mA range

● Display: 7 digits

Frequency and Phase

4

Power and Electric Energy

5

Measurement Characteristics

● Power / Electric Energy Measuring Range: 
Combination of AC voltage range and AC current range。

● Power Factor Measuring Range: -1.000 000…0.000 000…1.000 000

● Input of Standard Electric Energy Pulse: 

Frequency ≤10 kHz, input level from 0 to 3.3 V…24 V

● Output of Standard Electric Energy Pulse: 
High frequency FS @ 60 kHz, low frequency FS @ 6 Hz

General Specifications

● Line Power: 220 V ±22 V, 50 Hz ±2 Hz

● Maximum Power Consumption: 80 VA

● Operating Environment: 0 °C to +40 °C, 20 % to 85 % R·H, non-condensing

● Storage Environment: -20 °C to +70 °C, <95 % R·H, non-condensing

● Dimensions (W × H × D): 460 mm × 195 mm × 320 mm

● Weight: 12.5 kg

● Communication: RS-232 interface

Selection Guide

6





迅雷彩票注册 湖北11选5开奖 北京两步彩走势图 云南11选5开奖 山东11选5走势 创富彩票官网 山西11选5开奖 中华彩票网 58彩票开户 满堂彩注册